Genetically Modified Organisms and Concerns of Safety Research Paper

Genetically Modified Organisms and Concerns of Safety - Research Paper Example Humans have long sought to push the boundaries and experiment well outside the zones of comfort and recommendation. Such pushing of the envelope has given us the age of jet travel, space exploration, advanced science, and many other inventions and realities that we would not otherwise have. Yet, the fact remains that pushing the envelope and seeking to engage in something that is unknown is a process which only certain individuals within society have been comfortable at performing. Due to such an understanding, it becomes obvious that expecting all of society to engage in an activity that might be entirely outside of their comfort zone is neither ethical nor advantageous. This is very much the situation with regard to the use of GMOs in food supplies around the globe. With the rapid advance of science, scientists and researchers have been able to genetically modify a host of different plants and organisms as a means of tweaking the way in which they produce. This level of scientific manipulation has been able to provide the world with heartier and more productive crops; however, the fact of the matter is that the true levels of drawbacks that are exhibited within these genetically modified organisms are not fully understood. Due to the level of incomplete knowledge that exists with regard to GMOs within the food, many nations around the world have banned them entirely. However, the United States and several other developed nations have not. As a means of analyzing the potential drawbacks and negatives that GMO might exhibit within a nation’s health and food supply, this particular analysis will focus upon several of these determinants and seek to provide relevant and up-to-date information.

Letter of Introduction Essay Example for Free

Letter of Introduction Essay Dear Chef Blaylock, I want thank you accepting me into this program. Im also very excited to learn new things about cooking. Being in this class will help me a lot later on in my goal of becoming a chef. I cook for my family and friends but I know that there are still a lot of things about cooking that I dont know and would love to learn in this class. see more:want to be a chef I chose to be in this culinary arts program because I know that I want to be a chef when Im older, and I wanted to start my education as soon as I could. I want to be a chef because I would get to cook every day and I can cook so many different things, so I wont be doing the same thing every day. By being in this class I hope to learn how to incorporate different foods together in a good way. I would also like to improve on my knife skills, and overall have a faster pace in cooking things. I like that this class is hands on. Im not very good at taking notes or doing assignments, which makes this program perfect for me because Im cooking almost everyday in here. I dont have a lot of experience in cooking other that me cooking for my family. I watch and helping my mom cook, its interesting because she can get very creative with food, I learn a lot from her. There are many skills I want to gain from being in this class, like the proper way to use knifes and use them fast and effective. I will gain a better perspective on the way things work together in a dish. I will also learn how to cook food properly for someone in a certain amount of time. This class is my favorite part of my day. It makes me excited to wake up in the morning knowing that I can come here and cook food for people to buy and eat. I love that people are eating the food that Im learning on. Knowing that people are eating the food i make puts a smile on my face and keeps me happy throughout the day. My goal is to become an executive chef in a really nice restaurant, so that I can make food for people and share my happiness through the food I make. Sincerly, Robin Komora

The Worlds Longest War :: essays research papers

The World's Longest War Where We Are Journals practice a laudable self-censorship of criticism of religions. The most vicious devil worship is mentioned with little comment and then only in crime reporting of the atrocities committed. This is a good thing. Religious hatreds are so easily inflamed, and there is so much history of religious persecution, that we are much better off with this self restraint. Furthermore the separation of church and state is spelled out in our constitution and is practiced in most countries of the world, even in the former USSR and China. In democracies it is legal for a political party to yearn for religious domination, but in all democratic countries such parties are very small and never reach the stage of challenging their constitutions. The name "Christian Democratic Party," common in Europe, refers to moral roots, not to theocratic ambitions. The consequence of this separation of church and state is that political contention is not poisoned by religious hatred. There is one exception, Islam, a theocracy which has savaged the world for over a thousand years. Its religious doctrine is that church and state are one and that canon law and civil law are one. It periodically believes that unbelievers must be converted or conquered and that hating infidels is a virtue and killing an infidel is a ticket to heaven. In many of the faithful this religious fanaticism has merged with the secular fanaticism of Marxism-Leninism to make a witch's brew of hate and savagery against Christendom and capitalism. ('America is the Great Satan.') The demise of Marxism-Leninism in Europe does not extend to the Middle East. Russian and Chinese weapons continue to be sold for Arab oil money. During centuries of warfare the western countries have become democracies. Even Eastern Europe is avalanching into democracy. But, except for present day Turkey and some Far Eastern countries which practice a mild form of Islam, the Moslem world is run by military dictators, theocratic oligarchies, or a combination of both. A short list of these contemporary dictators (most entitled "President" or "King") includes: Ghadaffi of Libya, Assad of Syria, Saddam Hussein of Iraq, the Mullahs of Iran, Fahd of Saudi Arabia, Hussein of Jordan, and the competing warlords in Lebanon and the PLO. This theocracy has conquered or converted much of the civilized world. It's conquests have been impeded more by internal factional wars, murders, and schisms than by resistance of its victims. It is now on the rising slope of its next onslaught. It can not yet attack the superpowers in open warfare. Israel is a salient of the West in the Middle East so open warfare has been repeatedly

Hegels Phenomenology of Spirit :: Philosophy Hegel Elephant Papers

Hegel's Phenomenology of Spirit One of the most difficult philosophical works ever written is Hegel’s Phenomenology of Spirit. In the "Introduction" to this work, Hegel attempts to aid his readers by describing the project that he carries out. But like so many things written by Hegel, the "Introduction" itself is formidable and very difficult to understand. In this paper, I attempt to "make sense" of the "Introduction" and, thus, contribute to the understanding of the Phenomenology. To achieve this end, I take the great liberty of comparing philosophers with blind men and Reality with an elephant. I take a series of claims made by Hegel in the "Introduction" and show how they make sense of his project once they are seen in the context of John Godfred Saxe’s poem, "The Blind Men and the Elephant." In doing so, I explain the similarity of problems presented in the poem and the Phenomenology. Further, I show how the nature of both problems places the same kind of restrictions on anyone trying to overcome either. While Saxe’s poem urges an acceptance of the fact that total truth is always beyond your grasp, Hegel’s goal is to achieve such a truth. What you will see is that all the characteristics that would have stopped most philosophers and Saxe, become the means by which Hegel thinks he can ultimately achieve knowledge of the Elephant. One of the most difficult of the "Great Philosophical Works" is Hegel’s Phenomenology of Spirit. As you read the book, you are caught in a maze of conflicting claims and you quickly become unsure of your footing. Is this Hegel’s own position or is it a characterization of the very positions that he is attacking? In fact, it is not long before you begin to wonder: Where is Hegel in all this? If you turn to the "Introduction" of the Phenomenology, you find that, even when Hegel attempts to be helpful, his explanations do not really throw much light. "Now, because it has only phenomenal knowledge for its object, this exposition seems not to be Science, free and self-moving in its own peculiar shape; yet from this standpoint it can be regarded as the path of the natural consciousness which presses forward to true knowledge; or as the way of the Soul which journeys through the series of its own configurations as though they were the stations appointed for it by its own nature, so that it may purify itself for the life of the Spirit, and achieve finally, through a completed experience of itself, the awareness of what is really is in itself.

Ethical Decision-Making Model Paper Essay

Ethics are not gained in one day. Ethics are built over time from experiences. From childhood to adulthood these learned behaviors add to traits that help shape an individual; they complete who one is and what one believes. Ethics guides individual’s understandings of the concepts of right and wrong. In everything one does, decision-making is involved. Work, school, home, and communications, ethical beliefs are challenged. Ethics guide one’s thought process for these challenges and help approach any situation long before it happens. Ethics are rules and standards governing the conduct in which one lives and makes life decisions. Building ethics is a learning process; the things one learns, as one grows, will govern and guide the rest of one’s life. Ethics are important to today’s society. Individuals tend to face stressful situations by ignoring ethics and doing their own thing. This is why ethics play a significant role in communication. Ethical communication encompasses one being honest in all communications; keeping an honest and open opinions towards others. In some business situations, ethical communication involves keeping confidential information confidential, and not discussing personal business. In the more public the position, there is a greater need for ethical principles. Ethical communication help promote access to opportunities necessary to fulfill human potential; to help contribute to business, families, communities, and society in general. Ethical communications promote caring climates and mutual understandings that respect the unique needs and characteristics of every individual. It is being committed to courageous expression of personal convictions to pursuit fairness and justice. There are various forms of ethical decision-making processes. There is Aristotle’s  Mean, Confucius’s Golden Mean, Kant’s Categorical Imperative, Islam’s Divine Command, Mill’s Principl e of Utility, Rawls’s Veil of Ignorance, and Judeo-Christian Persons and Ends. A few personal favorites, Aristotle’s, Confucius’, and Mill’s process of thinking. Aristotle’s ethics fits deduces facts about the nature of the world and the nature of man by the use of reason. Aristotle’s ethics are an example of virtue ethics. Virtue ethics concentrates on the worth of the moral agent and not the consequences of his or her actions; â€Å"good cannot be identical for all men† (Learning activity- transcript ethics: what is right?, 2012). Confucius emphasized personal and governmental morality, correctness of social relationships, justice and sincerity. Confucius’s Golden Mean is a golden rule; do not do to others what you do not wish for yourself. Mill’s process of thinking; â€Å"Mill believed that every individual has sovereignty over his or her own body, psyche and spirit† (Learning activity- transcript ethics: what is right?, 2012). Mill followed more of a utilitarianism method which proposed that this principle should be used mainly in determining the value of rules such as do not kill, do not lie, do not steal, and so forth. The ethic process that I bleive to be better is John Stuart Mill’s. I choose Mill’s, because Mill believes that we as people have control over our actions and within our conscience minds, we know right from wrong. Mill’s Principle of Utility is the easiest for a majority of people to follow. It leads to morally sound decisions, handling moral dilemmas, and helps to make effective moral decisions. â€Å"The principle of utility determines the rightness of acts (or rules of action) by their effect on the total happiness† (Learning activity- transcript ethics: what is right?, 2012). For example, within everything one does decisions have to be made. Morally we know what it is right and wrong, because many individuals are brought up that way. In a business environment, every individual is personally responsible for themselves, for being honest, and respectful. As a worker, I follow not only my ethics but those of the company. â€Å"All of our directors, officers and associates must conduct themselves accordingly and seek to avoid even the appearance of improper behavior† (Code of business conduct and ethics, 2015). For example, answering the phone we are to be polite and respectful throughout the entire phone call. Customers will call to ask questions if we have a certain product in stock or the product at all. I answered the phone and was asked  if there were any karaoke radios in stock. I turned to my co-worker to ask her, she replied â€Å"Just tell them no.† I was shocked at her response. Instead of telling the customer no, I put them on hold and searched myself. I knew in my conscience mind it would be wrong for me not too. I would rather speak the truth (John Stuart Mills Utility) and avoid a communication dispute later. Ethics and morals are crucial concepts in today’s world. Ethics are rules and standards governing the conduct in which one lives and makes life decisions. Ethics build traits that help shape an individual beliefs and help shape and understanding of right and wrong. Every day one’s ethics are challenged by work, school, home, and most importantly communication. It is important to understand how to react to a particular situation long before that situation happens. Building ethics and communication ethics is a learning process, but the things one learns, as one grows, will govern and guide the rest of one’s life. Living by John Stuarts Mill’s Utility can promote an environment every individual can live in of fairness and justice. References Code of business conduct and ethics. (2015). Retrieved from Big Lots Inc.: http://www.biglots.com/corporate/careers/corporate-culture Learning activity- transcript ethics: what is right? (2012). Retrieved from University of Phoenix: https://newclassroom3.phoenix.edu/Classroom/#/contextid/OSIRIS:48172976/context/co/view/activityDetails/activity/f3640959-b484-4642-9f12-326e54bc3a54/expanded/False

Essay on Morality

Essay on Morality Essay on Morality Essay on MoralityHow do you make moral decisions? What resources inform you, personal, professional, etc.?Moral decision is a rational procedure of moral consciousness that makes the choice of action giving preferences to certain moral values. Main steps in making moral decisions are analysis of moral situation, definition of the problem, comparison of options, assessment of consequences, and making the decision.Correctness of the decision depends on the individual’s knowledge of the issue, which, in turn, relies on personal moral experience and moral culture. Moral decision-making involves such mechanisms of ethical consciousness as sense, reason, and intuition. While sense successfully functions in solving relatively simple moral problems (with common, patterned acts), it gives way to reason that makes creative moral decisions. Thus, moral experience guides a person in situations where circumstances are beyond the stereotypical thinking. In a situation that does not provide sufficient information for decision-making and at the same time requires a quick choice of an option, moral intuition comes into action. Accumulating moral experience of a person, intuition in a way replaces the missing opportunity to assess all the pros and cons for each of the options for action (Holmes, 2007). All three mechanisms complement each other, and only the adequacy of one of them to a specific situation allows making a moral decision.Dynamic pace of modern life along with scientific and technological revolution and its affect on society increase the individual’s responsibility for moral decisions. Therefore, there is a strong need to create a harmonic moral world of an individual, whose rational decisions should be done not at the expense of one’s emotional richness, and achieved in unity with the development of the culture of the feelings.Discuss the moral dilemma from the short film on food (Food, Inc). What solutions would you recommend?The film in ques tion is an unflattering overlook of the US food industry and corporations that control it. The author investigates the industrial production of meat, grains and vegetables, showing viewers how inhumane and environmentally unfriendly this process is now. The law allows corporations to deliver to consumer’s table cheap but dangerous food.Any corporation, if it was a real person, would be unsociable, intractable, authoritarian, and not prone to long-term relationships. The courts and the government consider a corporation as a community of shareholders, as a business owner, but the corporation itself has no moral barriers and liabilities (Weber, 2009).On the one hand, the demonstrated technology would be useful in the case of a cataclysm, when humanity would not be able to grow food in a natural way. But currently it is not the case and there is no justified need for such food! On the other hand, when corporations, whose aim is cheap production and maximal profits, take over the production of food, that is when these technologies come at hand. In the second half of the twentieth century, we discovered an amazing opportunity to produce cheap chemicals: fertilizers, chlorine, and pesticides to kill insects. It seemed that all of this would improve our lives. But what we see now? Cancer epidemic which we cannot stop (Weber, 2009).The film presents a standard and one of the most important moral dilemmas of modern society the choice between public good and private gain. Of course, one could say that there is an easy way out to follow one’s moral principles and collectively decide to refuse from substance and technology dangerous for the environment and human. However, in such dense networks that depend on the decisions of many people, relying on the moral qualities of each of them is a utopia. Yet, one of the possible effective solutions could be tougher legislation in this area, and reduction of the influence of corporations on government.

Marketing Management Essay Example

Marketing Management Essay Example Marketing Management Essay Marketing Management Essay Strengths Strong Management (Shakeys) Strong management can help Shakeys reach its potential by utilizing strengths and eliminating Size Advantages (Shakeys) Size advantages lower Shakeyss risks. The larger Shakeys gets, the more resources they have to Technology (Shakeys) Superior technology allows Shakeys to better meet the needs of their customers in ways that Cost Advantages (Shakeys) Lower costs lead to higher profits for Shakeys. A low cost leader can undercut rivals on price Customer Loyalty (Shakeys) When given a choice, customers are loyal to Shakeys. Instead of targeting all customers, Shakeys Weaknesses Customer Service (Shakeys) Weak customer service hurts Shakeyss reputation and causes customers to flee to competitors, who Opportunities Innovation (Shakeys) Greater innovation can help Shakeys to produce unique products and services that meet customers New Technology (Shakeys) New technology helps Shakeys to better meet their customers needs with new and improved products New Products (Shakeys) New products can help Shakeys to expand their business and diversity their customer base New Markets (Shakeys) New markets allow Shakeys to expand their business and diversify their portfolio of roducts and Threats Bad Economy (Shakeys) A bad economy can hurt Shakeyss business by decreasing the number of potential customers Intense Competition (Shakeys) Intense completion can lower Shakeyss profits, because competitors can entice consumers Shakeys SWOT Analysis Profile away What is a SWOT Analysis? It is a way of evaluating the strengths, weaknesses, opportunities, and threats that affect something. See WikiWealths SWOT tutorial for help. Remember, vote up the most important comments. Check out WikiWealths entire database of free SWOT reports or use our SWOT analysis generator to create your own SWOT template.

Zimmermann Telegram

Zimmermann Telegram The Zimmermann Telegram was a coded message sent from Germany to Mexico in January 1917. Once the Zimmermann Telegram was intercepted and decoded by the British, the contents were leaked to the U.S. and helped change the tide of American public opinion and brought the U.S. into World War I. The Story of the Zimmermann Telegram The Zimmermann Telegram was secretly sent from German Foreign Minister Arthur Zimmermann to Germanys ambassador in Mexico, Heinrich von Eckhardt. The British managed to intercept this coded message and their cryptologists were able to decipher it. Within this secret message, Zimmermann revealed Germanys plan to restart unrestricted submarine warfare as well as offered Mexico territory from the United States if Mexico were to declare war on the United States. On February 24, 1917, the British shared the contents of the Zimmermann Telegram with U.S President Woodrow Wilson, who had been elected to a second term on the slogan He kept us out of the war. The contents of the Zimmermann Telegram then appeared in newspapers five days later, on March 1. Upon reading the news, the American public was outraged. For three years, Americans had prided themselves on safely keeping out of World War I, a war they believed to be contained to Europe, which seemed far away. The American public now felt the war was being brought to their own land. The Zimmermann Telegram helped change public opinion in the United States away from isolationism and toward joining World War I with the Allies. Just a month after the contents of the Zimmermann Telegram were published in U.S. papers, the United States declared war on Germany on April 6, 1917. The Full Text of the Zimmermann Telegram (Since the coded Zimmermann Telegram was originally written in German, the text below is a translation of the German message.) We intend to begin on the first of February unrestricted submarine warfare. We shall endeavor in spite of this to keep the United States of America neutral. In the event of this not succeeding, we make Mexico a proposal of alliance on the following basis: make war together, make peace together, generous financial support and an understanding on our part that Mexico is to reconquer the lost territory in Texas, New Mexico, and Arizona. The settlement in detail is left to you. You will inform the President of the above most secretly as soon as the outbreak of war with the United States of America is certain and add the suggestion that he should, on his own initiative, invite Japan to immediate adherence and at the same time mediate between Japan and ourselves. Please call the Presidents attention to the fact that the ruthless employment of our submarines now offers the prospect of compelling England in a few months to make peace.

Eliminating Speed Limits Essay Example | Topics and Well Written Essays - 500 words

Eliminating Speed Limits - Essay Example They claim that the only purpose served by the imposition of speed limits is in terms of revenue generated for the state in terms of fines collected for traffic violations. At the other end of the spectrum, it is argued that speeding is the major cause of road fatalities. "Speeding reduces a driver's ability to steer safely around curves or objects in the roadway, extends the distance necessary to stop a vehicle, and increases the distance a vehicle travels while a driver reacts to a dangerous situation." (NHTSA1). Apart from the reduction in fatalities, environmental concerns are also to be considered while reviewing the need for speed limits. The Slower Speed Initiative (SSI), a UK based program, says, "reducing speed limits is the only single most effective measure to reduce carbon emissionsreduced speed would mean, increased road safety, reduced road danger, fuel consumption, noise and encouragement for walking, cycling and public transport" (SSI). Germany is the only industrialized nation in the world that does not have a speed limit for its motorists on its famed Autobahns. However, stricter laws and stringent enforcement of rules accompany this.

History of Statistics Essay Example | Topics and Well Written Essays - 500 words

History of Statistics - Essay Example He further elaborated that statistics can be applied to numeric, alphabetical, and even symbolic data. Statistics has been traditionally regarded as the "science of the state" because its original designation and application is in the analysis of the data about the state. Statistics is primarily used to refer to the collection and classification of data for governmental and administrative bodies in the early 19th century. The 20th century saw a substantial advancement in statistics as this science is not only employed to gather demographic data but has also become an instrumental tool in the analysis of public health concerns, economic, and social matters (Statistics 3-5). With these developments, the task of statistician has branched out from the collection and analysis of the governmental data to encompass other sectors like business and industry, health and medicine, learning, research, social scientists and natural resources (Careers in Statistics 1-20). Statistics is important to all these fields as the often predict and test the validity of various hypothesis. The main task of the statistician in these diverse fields is to carry out the statistical processes-data collection, analysis, presentation, interpretation of results and elaboration of methods. Statisticians must also determine the validity of the data they gather.

Lust by Susan Minot Essay Example | Topics and Well Written Essays - 750 words

Lust by Susan Minot - Essay Example The narrator is a young girl. The theme of the story revolves around male and female sexual patterns and expectations. In this essay I will examine some of the questions raised by this interesting story. â€Å"Lust† is set in the 1960s and 1970s and has a teenage girl as its narrator. She is involved in relationship with many boys. The story narrates how the girl gets connected to each boy and the relationship and sex life she has with each one. The tone is so somewhat impassive, which may mean that the girl is not moved by any relationship or feels attached to anyone. This is one of the surprises of the story. You expect, from the title, that the characters would be full of passion and desire, but they act more like robots or people lost in a mist. The title is probably therefore meant ironically—or perhaps the author didn’t realize how little feeling was in her depictions. The title of the story, â€Å"Lust,† hints at a story about passionate sexual relationships, but the voice the reader encounters is one of despair, indifference-- unexcited and cold. The narrator is involved in the relationships, but describes them with little color and individuality. The narrator takes the readers through each event in her sex life. She also shares her thoughts after her sex acts and the tone is quite casual and could be shocking to conservatives. The tone brings out the attitude of the girl towards sex and morals. This is one of the central conflicts of the story: between what the girl wants and what the girl gets. She is clearly looking for something more meaningful, but never really finds it. A lot of her unhappiness is an expression of this unresolved conflict. This trouble really resides in her own character. She has trouble generating meaning. The narration gives the events in the form of a list evoking the idea that the sexual acts are just thought an d acted out in an order or executed as planned

History Essay Example | Topics and Well Written Essays - 750 words - 17

History - Essay Example Arab nationalism looked upon the encroachment of Jewish settlers into Palestine, as nothing more than an extension of European Christian interests and influence into Palestine, which needed to be checked. Thus opposition to Zionism and its presence in the Palestine as a part of Palestine interests emerged in the early 1900’s The roots of the Arab-Israeli conflict thus lie in the perception of the Arab’s that the presence of Jews in Palestine is an extension of the Christian Europe attempts to displace the Islamic rule in Palestine and pose a threat to the Islamic influence over Jerusalem (Thornton, 2008). The formation of Israel and the subsequent conflicts have seen the displacement of more than four million Palestinians from their native lands. Israel refuses to accept the return of these refugees and the status of these refugees continues to remain as a stumbling block to a solution to the Arab Israeli conflict (Asser, 2007).The status of Jerusalem and control over it was and still remains a thorny issue for the resolution of the Arab-Israeli conflict. The Israeli lay claims to an undivided Jerusalem as their capital, while to the Arabs giving up Jerusalem and its holy Muslim sites would be capitulation (Whitaker, 2000). Jewish settlements have come up in the West bank and Gaza, which are proclaimed areas of the limited self rule enjoyed by the Palestinians. These settlements in some cases have grown to be small cities. The encroaching Jewish settlements and the status of these settlements pose a severe problem in any resolution to the Arab-Israeli conflict (FAQ on Israeli settlem ents). The first core belief in Islam is that there is only one God and Muhammad as his Prophet. The God in Islam is omnipotent and a unique Being that rules the world. Islam requires its followers to know the will of God and become more subservient to it. The second core belief in Islam is

Compare and Contrast of Administrative Law Term Paper

Compare and Contrast of Administrative Law - Term Paper Example The Congress has enacted a number of laws since the beginning of the 20th century to address the issue of bureaucracy. These prohibitions are inclusive of a 1913 repeal that sought to ban the hire of â€Å"publicity experts,† a 1951 ban on the agency spending on spending on publicity and propaganda, and a 2005 the ban on video news, with a provision that allowed the release of such videos if the source was willing to be identified as the originator. Scholars have described the evident Congress antagonism to public relations in public administration as part of an institutional planned push back by the legislature to the natural tendency of government agencies to seek autonomy. This has offered public administrators with an opportunity to mobilize support in an effort to increase autonomy of the agencies and reduction of the Congressional advantage over it (Lee, 2009). The congress in 1919 enacted a law that criminalized lobbying of the law-making agency. Funny enough, legislato rs cited the law when disagreeing on particular activities o f the agency but not a single prosecution was enacted by the by the US department of justice. The law however was revised in 2002 that decriminalized agency lobbying by the congress, but retained the provisions of engaging in such activities. Crisis Bureaucracy Bureaucratic structure is responsible for shaping the legal interpretations and regulatory decisions of agencies, offering a framework through which modern governments operate, and it is due to this reason that Policymakers fight to effect the necessary legislations. The article discusses two new issues that harbor important implications for lawyers and political scientists, which encompass how of legislative process responds during a crisis and the underlying uncertainties that surround major bureaucratic reorganizations. The result of this perspective illustrates how agencies make use of their administrative power and how they interpret their legal mandates. As cr ises enlarge opportunities for legislative action, changes in homeland security policies are mostly driven by the efforts of politicians who try to effect regulatory and administrative activities in various domains of the said sector. Changes in the nature of and scope of security policy may have adverse effects on other legal domains Coast Guards environmental regulatory functions or the application of laws in immigration departments of the country. Politicians cunningly use the occasion of legislation to force changes in other areas that have little to do with the principle issue being addressed (Cohen, et al 2006). A possible reason why the president changed his mind about the reorganization of the systems may be because he did not want to be part of the loosing side. The Administration appears to support such a move to further domestic policy priorities hat are independent of the homeland security. Such changes put the president’s legacy into question, more significantly fixing the precise extent to which the president and his top advisors knowingly planned to weaken the domestic legacy without paying attention to the corresponding homeland security benefits. Optimal Political Control of the Bureaucracy This article argues that a bureaucratic insulation degree from political control processes that is moderated by law increases rather than reduces the majority of

History Essay Example | Topics and Well Written Essays - 750 words - 17

History - Essay Example Arab nationalism looked upon the encroachment of Jewish settlers into Palestine, as nothing more than an extension of European Christian interests and influence into Palestine, which needed to be checked. Thus opposition to Zionism and its presence in the Palestine as a part of Palestine interests emerged in the early 1900’s The roots of the Arab-Israeli conflict thus lie in the perception of the Arab’s that the presence of Jews in Palestine is an extension of the Christian Europe attempts to displace the Islamic rule in Palestine and pose a threat to the Islamic influence over Jerusalem (Thornton, 2008). The formation of Israel and the subsequent conflicts have seen the displacement of more than four million Palestinians from their native lands. Israel refuses to accept the return of these refugees and the status of these refugees continues to remain as a stumbling block to a solution to the Arab Israeli conflict (Asser, 2007).The status of Jerusalem and control over it was and still remains a thorny issue for the resolution of the Arab-Israeli conflict. The Israeli lay claims to an undivided Jerusalem as their capital, while to the Arabs giving up Jerusalem and its holy Muslim sites would be capitulation (Whitaker, 2000). Jewish settlements have come up in the West bank and Gaza, which are proclaimed areas of the limited self rule enjoyed by the Palestinians. These settlements in some cases have grown to be small cities. The encroaching Jewish settlements and the status of these settlements pose a severe problem in any resolution to the Arab-Israeli conflict (FAQ on Israeli settlem ents). The first core belief in Islam is that there is only one God and Muhammad as his Prophet. The God in Islam is omnipotent and a unique Being that rules the world. Islam requires its followers to know the will of God and become more subservient to it. The second core belief in Islam is

Production Planning using ERP Essay Example | Topics and Well Written Essays - 1000 words

Production Planning using ERP - Essay Example However it is not widespread these days, it is probable to carry out material requirements planning tasks by hand as well (Waldner & Duffin, 1992, p. 47). MRP is a procedure that comprises a number of fundamental business tasks and information across the business encompassing entire levels in the bill of materials, sales forecasts, sales orders, and inventory. With the help of MRP it can be decided accurately what as well as when materials are necessary to manufacture the most timely as well as competitively priced services and products for customers (GreenTree, 2009) and (Qiang, Khong, San, Jianguo, & Choy, 2001). Beasley (2009) has stated that material requirements planning system is a material planning technique which appeared in 1970s by making use of information technology and computer technology. The major characteristics of material requirements planning are the formation of material necessities by means of exploding the bills of time-phasing and material of requirements by means of posted standard lead times (RockfordConsulting, 2009) and (Beasley, 2009). Material Requirements Planning II is acknowledged as the next generation of material requirements planning and it comprises the characteristics of closed loop system. Through this system the production planning takes the fundamental and main schedule that force the material plan which is the main input to the business or manufacturing capacity plan. Feedback loops proffers input to the elevated levels like a reiterative procedure (RockfordConsulting, 2009). In material requirements planning II operation, forecasts are linked as well a s synchronized for client orders, as well as supplied to the main/master scheduling module. When the master schedule is positioned, the material requirements planning procedure explodes the bills of material, usually on weekends or overnight, also builds up the material requirements. The requirements or materials feed the capacity planning

Strategic Marketing Plan Essay Example for Free

Strategic Marketing Plan Essay This growth will be the direct result of a new toothpaste product launch. The following plan draws on related Industry, Competitive, and Consumer analyses to justify the production of a â€Å"mouth pod† and the market for such a future-oriented design. The plan also provides an implementation plan for the launch of this product, as well as a recovery plan. Overall, this â€Å"outside-the-box† thinking will set Crest apart from its competitors. Unfortunately, given the current state of the economy, there are insufficient resources to support a national or even a regional launch of the new product. Thus, the product will initially launch in only one New York County. Rochester, in Monroe County was chosen on the basis that it holds the highest potential for the product’s success. Syracuse in Onondaga County and Binghamton in Broome County were not chosen. This choice is supported with data from a comparative analysis that demonstrates how and why it is believed to be the best potential geographical market. The recommended geographic area is premised on a detailed and careful assessment of the geographic market(s) and how the chosen county best suits this proposed strategy. This will serve as a trial; if the product performs well in Monroe County, it will later be rolled-out to more areas. This subsequent roll-out will determine whether the product is given a national launch. SITUATIONAL ANALYSIS: SWOT STRENGTHS * Inventive design, unlike any other toothpaste product on the market. * TWBA Chiat Day will significantly assist Crest in leveraging the So Mod Mouth Podsâ„ ¢. * Consumers are seeking coupons due to the current state of the economy. WEAKNESSES * Most of Crest’s products are either mature or declining within the product life cycle. As a result, new products are continuously introduced. * Competitors are able to quickly release comparable products, intensifying competition. * Toothpaste promotions often use sales to drive new purchases based on price. OPPORTUNITIES * Product differentiation- with the amount of rivalry, there is plenty of reason to invent and innovate. * Essential to western hygiene- there is no one who would argue that brushing one’s teeth with toothpaste is not a hygienic staple in western culture. * Emerging markets- as is true with a large variety of industries, the developing world poses a huge opportunity for growth. THREATS * Everyone is essentially selling the same thing- The Company is no longer selling toothpaste, but more the brand or the features of the toothpaste. * Low switching costs- At one point, toothpaste purchases were mainly driven by individual habits, inclination towards particular flavor and familiarity with the product However, consumers are much more price-sensitive after the recession, even in the recovery stage. They do not always stick to brands they desire, they are now shopping for the best value. * Competitors, namely Colgate, infringing on prized shelf space. ISSUES ANALYSIS amp;OBJECTIVES Issue #1: Product differentiation The toothpaste product market is heavily saturated with products (and product lines) that are very similar to each other. They all cover the range of benefits that toothpaste consumers seek, from whitening to tartar control. Consumers are fatigued by the vast array and similarity of toothpaste products available on store and virtual shelves. Fatigue in relation to innovation exists as well, because toothpaste brands have pushed innovation to its limit. Even the newest toothpaste products like Colgate â€Å"New? Optic White Toothpaste and Crest â€Å"New? 3D White Toothpaste do not have much of an edge. Six months after launch, the perception of innovation and relevance fades away. Whitening was once an innovative feature, but is now expected. For a new toothpaste product to be successful, it will need to break free of this mold. Objective: To achieve sales of 50,000 packs of day and night â€Å"mouth pods† by the second quarter. Strategy: Crest will follow a strategy based on innovation and disruption. The launch of this new product will break through the clutter comprised of existing toothpaste products. It will feature the Crest logo, thereby boosting brand awareness and sales of other Crest products. Ultimately, a new product category may arise out of a successful campaign for this launch. The new product will be available in two versions: one made specifically for brushing in the morning, and a companion product made specifically for brushing at night. The daytime use product would have light-colored packaging, and the nighttime use product would have dark-colored packaging. If the product is very successful, it could set other brands into their own category of being â€Å"anytime† toothpaste products. Crest’s new brand will gain market share from being in its own niche. A companion product for nighttime use will push more people to brush their teeth before going to sleep. This will not only improve the top line growth of Crest’s new brand, but it will also cause consumers to develop the good habit of brushing two or more times a day; this may also increase the frequency in which a consumer must purchase toothpaste. Tactics: The new product will have a slightly higher price point than that of Crest’s current â€Å"New? products and those of competitors. Since toothpaste is a low involvement purchase, tactics will focus on drawing consumers? attention. Display stands and posters will accomplish this by brining consumers? attention to the product’s placement on retail shelves. The package design will stand out amongst other toothpaste products on the shelves. Online promotions will include banner ads on retail websites and social media profiles, including Facebook and Twitter. Special offers for the product will be made both online and in stores. Issue #2: Growth Stagnant growth in the U. S. market has plagued the toothpaste industry. As mentioned in the Industry Analysis, 98% of Americans are users of toothpaste, which does not allow for much growth. The population it is not increasing at a rate high enough to sustain our goals of driving up sales in this country. Objective: To move Crest to the position of market leader by at least 5% points by the end of the fourth quarter. In current terms, Crest would need to gain another 6% of the market to ultimately have 41% and a five point advantage over Colgate. Strategy: Jump start the competition against Colgate by targeting a niche segment of the U. S. population who already enjoy luxury grooming products and are willing to try wild and new products. The primary target would be adults, ages 18-45 who consider themselves to be upper-middle class. The secondary target includes 18-30 year-olds who are still experimenting with new products and have not settled into a rut of brand loyalty. Our new product delivers the burst of innovation that has been so severely lacking in the toothpaste industry. We are offering a brand new delivery system and a feature that has yet to be mass-produced. Tactics: Strategic product releases that start in higher end supermarkets and drugstores. Releases will then move down the scale towards large discounters and superstores such as Wal-Mart. Although the new product will be priced only slightly higher than the average toothpaste, the goal is to position it as a more luxurious and fun way to brush one’s teeth. The roll-out for the test market will begin in January of 2013 and continue being released, hitting discount stores in July. The time sensitivity of this product release is almost irrelevant because there is no season of increased sales. Starting early in the year is just a ploy to have a fresh and energizing start to 2013. Placement on shelf will be further taken into consideration once packaging is completely finalized. Issue#3: Existing Brand Loyalty Consumers are more likely to continue purchasing toothpaste brands that they have used since an early age. Therefore, in order to gain a leading market share within the toothpaste segment of the oral care industry, it will be essential to break current purchasing behaviors of our targeted consumers. Objective: Our objective is to increase our brand equity by 25% within the first year of our pilot phase, specifically from repeat purchases by conquest buyers, who initially try Crest „New? So Mod Mouth Podsâ„ ¢ after being exposed to our integrated advertising campaign. Strategy: To spend $3M on advertising and promotion through an integrated advertising campaign that will highlight the benefits exclusively offered by our brand. Crest „New? So Mod Mouth Podsâ„ ¢ will reinvent the functionality of toothpaste and will bring a refreshing change to consumer perceptions of the category. Pamp;G and its competitors provide toothpaste products that meet current consumer expectations: whitening, plaque and tartar control, fluoride treatment, sensitivity, cavity and gingivitis prevention, and fresh breath. However, Pamp;G understands that consumers more strongly demand value, quality, and convenience. Overall, Pamp;G acknowledges the current, stagnant, state of the oral care industry and projects that the â€Å"pod† design will be a profitable opportunity to capitalize upon. Crest „New? So Mod Mouth Podsâ„ ¢ will fuse the benefits of current products with such a futuristic product design, that in effect it will weaken the bonds of loyalty non-Crest users have. The awareness of this fusion will be accomplished through targeted advertisements. Tactics: Advertising amp; Promotion Ad Agency Service Pamp;G will assign TBWA Chiat Day responsibilities for the launch campaign of Crest â€Å"New? So Mod Mouth Podsâ„ ¢, aligning our vision of Crest â€Å"New? So Mod Mouth Podsâ„ ¢ with the culture of this agency that values the concept of disruption as the underlying basis of its campaigns. Trial offer Pamp;G will send out to a sample of consumers $1. 50 off any purchase of our Crest â€Å"New? So Mod Mouth Podsâ„ ¢. This will be for a limited time of one month, before coupon discounts decline in value. Social Media Facebook â€Å"Likes† amp; Free Samples: Pamp;G will offer a 2-flavor sample pack to the first 1000 consumers, who â€Å"like† the Crest â€Å"New? So Mod Mouth Podsâ„ ¢ Facebook Page on the day of our launch. MARKETING MIX Product: Crest „New? So Mod Mouth Podsâ„ ¢ A pack will contain 60 pods; consumers could use one to brush in the morning and one at night. One product would be expected to last for one month before replacement. Crest aims to provide a whole-mouth cleaning experience that is convenient and intuitive. The product is sleek and modern in both look and feel. Our New Product’s Features The new product will have a mix of innovative and expected features. Innovative features include the products formulation; it is a fusion of toothpaste, gel and mouthwash in a round capsule. Within each capsule there will be invisible pockets of pressurized air. Like foaming toothpastes, this product will begin to foam soon after popping in a user? s mouth. The foam will get in-between teeth to fight cavities and kill germs that cause bad breath. The volume of one capsule is smaller than the amount of toothpaste generally applied by consumers to a toothbrush. The mouth pods are safer than toothpaste in cases of accidental ingestion. Active Ingredients Sodium Fluoride (0. 243%). Energy blend: panax ginseng root extract, acai fruit extract, yerba mate leaf extract, guarana seed extract. Inactive Ingredients: Glycerin Hydrated Silica, Water, Sorbitol, Sodium Hexametaphosphate, Propylene Glycol, Flavor, Peg-12, Cocamidopropyl Betaine, Sodium Lauryl Sulfate, Carbomer 956, Sodium Saccharin, Poloxamer 407, Polyethylene Oxide, Xanthan Gum, Sodium Hydroxide, Cellulose Gum, Titanium Dioxide. A blend of panax ginseng root extract, acai fruit extract, yerba mate leaf extract and guarana seed extract will serve as a very slight stimulant. While these substances won’t provide the kind of instant jolt expected from caffeine, they will deliver a healthier feeling of energy and alertness. The product for use in mornings would promote this feature as a burst of energy, a perfect way to start the day. Silica is similar to what dentists use to create a professional clean feeling. Expected Features Initially in relation to the research found about our target market, there will be a variety of basic flavors like Mint and Bubblegum. One of the product’s ingredients are a patented flavor booster to keep breathe ultra fresh. The product uses a fluoride mineral formulation to strengthen weakened tooth enamel. It reinforces enamel layers by rebuilding the weak spots on teeth. A sensitive element in the formulation protects against painful oral sensation. The product provides twelve hour protection from gingivitis, plaque, tender gums, bad breath, cavities and tartar. It promotes healthy gums and safely lifts off yellowing surface stains to restore natural whiteness to teeth. Packaging Design: The packaging will divide its capacity amongst a place for the day pods and the night pods. It will be clearly labeled. An advantage of this is that two different flavors can be included in one package, which gives the consumer the ability to have choice. This is innovative because usually a consumer is confined to one flavor, until they purchase a new tube of paste. Price With an analysis of current products and our assumptions of the cost of goods sold, we believe Crest „New? So Mod Mouth Podsâ„ ¢ must initially be priced at $5. 25 unit cost (without sales tax or shipping cost). Promotion An integrated marketing communications campaign will leverage the strengths of outdoor, print and television advertisements to create positive brand impressions. Online promotions will also be used: the design of Crest? website is modern and easily navigable, with links to social media extensions. A Facebook page will be created to focus solely on the new product, while Crest? s main Twitter account will promote the new product. Word of mouth buzz will be generated as the product becomes more popular. It will stem from creative in-store displays and social media communications. Place amp; Distribution Channels Crest â€Å"New? So Mod Mouth Pods will be available in the oral health care aisle of many stores in Monroe County, including CVS Pharmacy, Wegmans, Target, Walgreens, Wal-Mart, K-Mart, Sam? Club, and Costco. It will further be available for purchase online at the following websites: CVS. com, Target. com, Costco. com, Drugstore. com, Walgreens. com, Amazon. com, and Soap. com. Target Market Overall, the current target consumers for Crest „New? Toothpaste Podsâ„ ¢ are adults, ages 18-45 who consider themselves to be upper-middle class. The secondary target includes 18-30 year-olds who are still experimenting with new products and have not settled into a rut of brand loyalty. The basis for this decision is supported by the overall situational analysis, and pecifically the Consumer Analysis, which demonstrates that young adults are the largest demographic segment that adopts new product innovations. In effect, introducing a higher priced innovative product will be perceived as attractive to yo unger men and women, who are financially able and willing to try a new product. Given the research completed within the Consumer Analysis the county that best fulfills our target market is Monroe County. This county contains the highest population size of all three counties with a population of 735,343 people (Census, 2010). As shown in figure 1, Rochester (the largest metropolis area in Monroe County) has one the largest percentage of individuals between the ages of 15-49. Figure 1 also indicates that Rochester contains the highest percentage of the population with households containing individuals less than 18 years of age. By capturing this segment of the market, Crest can capitalize on repeat purchasing of these individuals, who will eventually be purchasing their own products. The Rochester area contains the highest population of African Americans of the three major cities with 41. 7% (Census 2010). This is a concern when marketing a new toothpaste product because as mentioned in the Consumer Analysis, African Americans are the most prone out of any demographic to purchase store brands over national brand toothpastes. However, when looking at the snap shot of the three counties provided in the Consumer Analysis African American’s only represent 15. 2% out of 735,343. This makes the finding insignificant and should not hinder the success of our new product when looking at the total population of the county. Figure 1: Overview of the three most populous areas in each of the counties | Monroe | Broome | Onondaga | Households with individuals under 18 years | 30. 40% | 23. 40% | 29% | 15-49 | 54% | 44. 60% | 54. 70% | 0-49,999 | 70. 30% | 67. 60% | 70. 00% | $50,000 to $200,000+ | 29. 70% | 32. 40% | 30% | Per capita money income in past 12 months (2010 dollars) 2006-2010 | $17,865 | $21,455 | $17,866 | Median household income 2006-2010 | $30,138 | $30,702 | $30,891 | Persons below poverty level, percent, 2006-2010 | 30. 40% | 27. 80% | 31. 10% | Since we are marketing a new innovative toothpaste product, promotion is another primary aspect in reaching our target market. The advertisements that accompany the launch of the â€Å"New? So Mod Mouth Podsâ„ ¢ should focus on the point of differentiation that this product will provide, such as convenience and multi-functionality. This will propel the product into a more diverse demographic segment as well. The income of the consumer is another factor driving the sales of this product. The Claritas? profiles that were identified in the Rochester Area were as follows: Suburban Sprawl, Young Influential, Domestic Duos, Home Sweet Home, New Empty Nests, and Country Casuals. These profiles were seen to be the most apt to be innovators or at the very least have the capital to try a new product. As outlined in the Consumer Analysis, these profiles have the income as well as the innovator psyche. When analyzing the areas surrounding Rochester, Esri data shows that the population contains affluent Prosperous Empty Nesters, College Towns, Sophisticated Squires, Connoisseurs, and Aspiring Young Families. The profiles of the surrounding areas of Rochester are ideal consumers for our new product because they indicate savvy consumers, who have the appropriate discretionary income to spend on new innovations and are motivated to do so. The Rochester area contains a number of colleges and universities, which will further fuel the sales of this new product, with convenience as the primary selling point. The benefits analysis section within the Consumer Analysis outlines what the consumer needs are. Consumers desire a product that makes clear points of difference, making the selection process less cumbersome. Since So Mod Mouth Podsâ„ ¢ are so unique from the other typical toothpaste products available, it will be easy for the consumer to perceive the added benefits of this product. So Mod Mouth Podsâ„ ¢ provide the consumer with all the mainstream benefits, while reinventing the toothpaste industry. RESEARCH amp; EVALUATION 1. Objective: To achieve sales of 50,000 packs of day and night mouth pods by the second quarter. Evaluation Mechanisms: Sales will be monitored by retail databases as they occur, and reported back to Crest immediately. 2. Objective: To move Crest to the position of market leader by at least five (5) percentage points by the end of the fourth quarter. In current terms, Crest would need to gain another 6% of the market to ultimately have 41% and a five point Advantage over Colgate. Evaluation Mechanisms: Market-share charts the issue of stagnant growth, will need a constant eye on the whole industry. Specifically, the amount of sales each company is acquiring. A market-share chart will become the most important tool in keeping the goal of becoming the industry leader on track. Sales will be monitored by retail databases as they occur, and reported back to Crest immediately. Other research will come from reevaluating the most desirable shelf space in stores. To negotiate the best spot in the aisle, the most looked-at spot needs to be known. Its common knowledge that eye level is preferable, but reaffirming research wouldn’t hurt. The research on market share will begin immediately and continue throughout 2013. The ideal shelf space research will finish 3 months prior to the launch to allow time for negotiation with retailers. Evaluation of the tactics will come via tracking sales figures, units sold, and the market share throughout 2013. 3. Objective: Our objective is to increase our brand equity by 25% within the first year of our pilot phase, specifically from repeat purchases by conquest buyers, who initially try Crest „New? So Mod Mouth Podsâ„ ¢ after being exposed to our integrated advertising campaign. Evaluation Mechanisms: Management Dashboard Through the use of our Active Data Warehouse we will be able to track all of our marketing campaigns and how closely they are aligning with our strategies stated above. We will initially be offering $1. 50 coupons, and will be actively measuring the impact of this on our weekly sales and revenue. Furthermore, TWBA Chiat Day will gather extensive consumer data based upon the advertising and promotion campaigns that the agency puts forth to implement within the next year.

The Purity Of Prepared Of Aspirin Biology Essay

The Purity Of Prepared Of Aspirin Biology Essay To synthesize the drug aspirin, the purity of prepared of aspirin is determined by a chemical test. In addition, the percentages of aspirin made are determined (CHM 1024 Organic Chemistry, practical manual). Introduction Aspirin also know as acetylsalicylic acid, in the history of medicine, aspirin is the first drugs that ever come into common usage which as medical treatments worldwide. It is known as a pain killer, fever reducer and anti-inflammatory agent. As a matter of fact, an anti-inflammatory agent has become a widely known and utilized treatment for arthritis.(1) Aspirin is also an anti-clotting agent. It is because it can inhibiting the production of thromboxane which will bind with platelet to create a patch of damaged walls of capillaries and platelet will become large enough to block the blood flow, locally and also downstream, aspirin also can use in long-term at low doses for helping prevent heart attacks, strokes and also blood clot formation.(2) The synthesis of aspirin is actually an esterification reaction. By acid derivative, salicylic acid is treated with acetic anhydride, which will giving a chemical reaction that change hydroxyl group in salicylic acid into ester group (R-OH → R-OCOCH3). This esterification reaction will yields aspirin as well as acetic group which is a byproduct in this reaction. This process is speed up by using catalyst which is concentrated sulphuric acid.(3) http://www2.volstate.edu/chem/1110/Synthesis_of_Aspirin_3.png Figure 1: salicylic acid reacts with acetic anhydride to form acetyl salicylic acid which is aspirin and a by-product, acetic acid. Overdose of aspirin will lead to acute or chronic poisoning. If a single large dose of aspirin is taken then it is acute poisoning; if taking higher than normal dose of aspirin over some period of time then it is chronic poisoning. The mortality rate for acute overdose is low, but for chronic overdose is more generally fatal. Other than that, overdose of aspirin also will have some bad side effects which is stomach ache and headache. These side effects can be reduced through the addition of buffer solution. The presence of any unreacted or excess salicylic acid is detect by 1% iron III chloride(FeCl3). As salicylic acid got phenol group, the FeCl3 test will giving a positive result that show colour change to violet colour if there have molecule possessing phenol group. Hence, the commercial aspirin will given negative result because it does not have phenol group with it. Hypothesis When salicylic acid reacts with acetic anhydride will yield aspirin and acetic acid. Procedure Preparation of aspirin A bath was prepared by using 400mL beaker was filled with half with water and it was heated until it boiling. 2.00g of salicylic acid was weighed and placed in 125mL dry conical flask. This quantity was used to calculate the theoretical yield of aspirin. 3mL of acetic anhydride was measured and added into the conical flask with gently swirled. The 3 drops of concentrated sulphuric acid was added into the flask during swirling. After that, the conical flask was placed in a beaker of warm water for 15 minutes. The reagents were mixed and then placed in a beaker of boiling-water bath for 30mins until the solid was completely dissolved. The solution was swirled occasionally. The conical flask was removed from the bath and it was cooled down to approximately room temperature which is 27Â °C. The solution was slowly poured into a 150mL beaker which containing 20mL of ice water and mixed completely then placed in an ice bath. During the ice bath, glass rod was used to mix the solution and scratching along the bottom of the beaker vigorously.(be aware no to poke a hole through the beaker.) The crystal were formed and collected by using Buchner funnel through filtration and suction. The crystals were washed by 5mL of cold water and the followed by 5mL of cold ethyl acetate. Suction was continued for at least 5mins for drying the crystals. The crystals were transferred to a 250mL beaker by using spatula and 5 drops of ethanol were added into the beaker. The beaker was stirred and warmed inside a water bath to dissolve the crystal. Re-crystallization process was performed. After the crystals dissolved 25mL warm water was added to the alcohol solution. The solution was let to cool down and then crystals were formed. Once the crystallization started, the beaker in the ice bath was set to complete the re-crystallization. The contents in the beaker were poured into Buchner funnel and suction and filtration was applied. Filter papers were used to remove all the excess water by moving the crystals on the filter paper anf placed it between several sheets of filter papers and gently pressed to dry the solid. Petri dish was weighed. Then crystal added on it and reweigh of petri dish. The weight of the purified aspirin was obtained by simple calculation and then this is used to obtain the percentages yield of aspirin. Analysis of Aspirin. Compare the quality of the synthesized aspirin with commercial aspirin and salicylic acid. 1% of iron III chloride was added to separate the test tubes containing aspirin crystals of each substance. The colour was observed. There will be no colour showed if aspirin is pure. Purple colour was showed if salicylic acid or traces is present in impure aspirin. Then the intensity of colour qualitatively tells how much salicylic acid was present. The aspirin crystals were observed under the microscope and were drawn on the result sheet. The purity of sample was tested by determining its melting point range. Reduce the sample to a fine powder by using mortar and Pestle. A melting point capillary tube with 1-2cm depth of fine crystals was loaded. The melting point f purified aspirin varies between 130-135 Â °C, temperature was noticed at the aspirin begins to melt and the sample has completely melted. Safety Precaution When dealing with acetic anhydride and sulphuric acid need to use gloves and do it in fume hood, because acetic anhydride will irritate the eyes; sulphuric acid will causes burn to skin because it is concentrated and corrosive. The aspirin prepares is not pure enough and cannot use as a drug as well as cannot consume. Result Table 1: Iron(III) Chloride, FeCl3 test on aspirin Test Observation Commercial aspirin no colour Purified aspirin Violet Table 2 : Experimental results Contents Reading 1. Weight of the salicylic acid 2.01 2. Weight of petri dish + filter paper 17.2075 3. weight of aspirin + petri dish + filter paper 18.1028 4. Weight of aspirin [3-2] 0.8953 5. Melting point of purified aspirin 144Â °C-172Â °C 6. Melting point of commercial aspirin 132.8Â °C-138.9Â °C Calculation The molar molecular mass of acetylsalicylic acid = 180g/mol The molar molecular mass of salicylic acid = 138g/mol The molar molecular mass of acetic anhydride = 102g/mol Number of moles of salicylic acid, C7H6O3 = (weight of salicylic acid) / (molar molecular mass of salicylic acid) = 2.0100g / (138g/mole) = 0.0146 mole Number of moles of acetic anhydride, C4H6O3 = (weight of acetic anhydride) / (molar molecular mass of acetic anhydride) = 3.246g / (102g/mole) = 0.0318 mole By comparing the number of mole of the salicylic acid and acetic anhydride, the mole of salicylic acid is lesser. Therefore, the acetic anhydride is in excess. Hence the limiting agent in this experiment is salicylic acid. By comparison of the chemical equations: C7H6O3 + C4H6O3 Æ’Â   C9H8O4 + C2H4O2 one mole of C7H6O3 reacts with one mole of C4H6O3 to produce one mole of C9H8O4 and one mole of C2H4O2 Theoretical yield of aspirin = 0.0146 mole (180g/mole) = 2.628g Actual yield of aspirin = 0.8953g Percent yield of the aspirin = (actual yield of aspirin) / (theoretical yield of aspirin) -100% =0.8953g/2.628g 100% =34.07% Diagram of Commercial Aspirin C:UsersAliceDocumentsBluetooth FolderIMG-20121011-WA0000.jpg Discussion In this experiment, aspirin crystals obtained were white crystals and is in pure form which is white crystalline solid. Then the percentages yield of aspirin obtained was 34.07%, and there are so many reasons that could not get a 100% yield of the aspirin. The product can be lost while transferred from one container to another. Other than that, when during suction through filtration, some of the aspirin might remain in the dissolved filtrate and this causes the yield of the product to be less than theoretical yield. Besides that, when weighing salicylic acid and acetylsalicylic acid there might have zero error on the weighing machine and this will also affects the result and inaccuracy in the yield of the product. The melting point of purified aspirin obtained will have error be found as well, because the instrument that using for measuring the melting point of aspirin was not totally cool down during measuring the crystals. Furthermore, aspirin might contain impurities that causes melting point to be higher or lower than the actual melting point. During the Iron (III) Chloride test, the commercial aspirin showed no colour change, it is because there have no impurities and suitable for ingestion, but for the purified aspirin it gave a positive results which mean the solution turns violet colour due to the impurities in the product and it proved that the purified aspirin is not suitable for ingestion. This experiment was required 3 drops of concentrated sulphuric acid, because concentrated sulphuric acid was act as a catalyst for speeding up the reaction without affecting the result. The reaction will still take place if the concentrated sulphuric acid were omitted. This experiment used ice water during the work up is due to the characteristic of aspirin. Aspirin is insoluble in water and cold water will reduce the solubility of aspirin in water and it can be isolated when undergo suction through filtration with chilled reaction solution. Then the water is used to hydrolyse the acetic anhydride to acetic acid and can be easily removed by filtration. Therefore, all the impurities can be removed. The principle of recrystallization is the amount of solute that can he dissolved by a solvent increases with temperature. Recrystallization only works when a proper solvent used. In this experiment the solvent that used to dissolved the impurities is ethyl acetate and then using hot filtration to remove inpurities. The purity of the synthesized acetylsalicylic acid was tested by FeCl3, if there is colour change (violet colour) that means there have impurities in acetylsalicylic acid. The purity of acetylsalicylic acid was determined by melting point. In this experiment the melting range for acetylsalicylic acid is 144Â °C-172Â °C which is higher than commercial aspirin which is132.8Â °C-138.9Â °C, meaning that acetylsalicylic acid obtained in this experiment contained impurities. There have some improvement for this experiments as in used all the salicylic acid powder and ensured that there is no drop on the table. During transferring the reactants from one to another container make sure that there is no any remaining in the container. Furthermore, during filtering the aspirin by using the suction ensure that all holes on the Buchner funnel are covered for preventing the reduction of yield product. Conclusion This experiment was supported the hypothesis suggested. When salicylic acid reacts with acetic anhydride will yield acetylsalicylic acid which known as aspirin. In this experiment, the limiting agent is salicylic acid. The melting point range for the acetylsalicylic acid obtained is 144Â °C-172Â °C, it is because it contains impurities. The theoretical yield of aspirin is 2.628g, but the actual yield of aspirin obtained is 0.8953g. therefore, the percentage yield of aspirin is 34.07%.

Grolsch Beer Advertisement Essay -- Advertising Marketing

Grolsch Beer: Using the Artistic Approach The advertisement for Grolsch beer, taken from the May 28, 1998 issue of Rolling Stone features Vincent Van Gogh’s Self-portrait. Grolsch beer uses three important components of argument (ethos, pathos, logos) to support their claim. However, logos is the most important because the audience must be able to logically interpret the ad. The advertisement connects with the audience by appealing to the reader’s logic of art history, while establishing a reputation of quality and credibility with the Grolsch name. Relying heavily on logos, the makers of this advertisement depend on the readers knowledge of the history of art and specifically of Van Gogh. The main text of the advertisement states, " The same bold taste since the days when body piercing meant cutting off an ear." Obviously the latter portion of this statement suggests a link to Van Gogh cutting off his own ear. Van Gogh’s Self-portrait symbolizes his missing ear by only showing his left one. For the audience to fully understand this, they must have some prior knowledge of the Dutch artist, Vincent Van Gogh. Grolsch beer creates its logos by relying on the wit of the reader. For example, a pun is used with the word "bold" in describing the beer that may also be making a reference to the fact that Van Gogh was a very bold artist. In order for the audience to be captured by this ad, they must be able to recognize that it is a pun, and that it is the punch line that identifies Grolsch beer with the reader. While much of the ad relies on the reader’s knowledge of art, the ad also relies heavily on logical claims. The first is the claim of fact: Grolsch beer has existed since 1615 and because this statement cannot ... ...robably have taken some course in school to know something about Van Gogh. Therefore, the familiarity that people have with Van Gogh enables them to interpret the underlying meaning of the word "bold". When the ad is read it is quite easy to see that "bold" is describing the taste of the beer. Furthermore, the deeper meaning of the word "bold" is related to Van Gogh and his artwork. With many of his works banned from art galleries, Van Gogh was considered one of the boldest artists of his time. Relating the bold taste to the boldness of Van Gogh creates a sense of knowledge in the reader, thereupon giving the reader a feeling of "Hey! I’ve actually learned something." Now the individual feels intelligent because he has interpreted the ad. I believe the ad’s ability to create this feeling in the audience is what makes it such a well-thought out advertisement.

Slovakia Economic Analysis :: essays papers

Slovakia Economic Analysis Country: Slovak Republic Formation of the Slovak Republic The Slovak Republic, or Slovakia, is located in Eastern Europe with a population of 5.4 million people and borders the countries of Poland, Austria, the Ukraine, and the Czech Republic (The World Bank). As originally part of the former nation of Czechoslovakia, the Slovak Republic has only recently begun to write its own history (Abizadeh, p. 171). During 1989 many revolts took place against eastern European governments under communism, including Czechoslovakia (Slovakia.Org, â€Å"20th Century†). Both Slovaks and Czechs staged massive protests against communism in Czechoslovakia and ended the communist regime in November 1989 (Slovakia.Org, â€Å"20th Century†). Under the new non-communist system of government, the two republics of Czechoslovakia were established: the Slovak Republic and the Czech Republic (Embassy of the Slovak Republic). In June 1990, with the federal and republic-level governments in place, free elections were held for the first time in the country since 1946 (Slovakia.Org, â€Å"20th Century†). The main concern of the new government was the transformation of Czechoslovakia from a state-controlled to a free market economy (Embassy of the Slovak Republic). Disputes arose between the two republics about reform process which focused on privatization, the encouragement of foreign investment, policy of macro-economic stabilization, price liberalization, and liberalization of foreign trade (Slovakia.Org, â€Å"20th Century†). The Czech Republic was more economically developed than the industrial-based economy of Slovakia (Slovakia.Org, â€Å"20th Century†). The transition to a market economy left the Slovak Republic to endure greater economic hardships than the Czech Republic (Sovakia.Org, â€Å"20th Century†). For example, the federal government chose to dramatically cut the country’s defense industry, resulting in a large decrease in industrial production and a large rise in unemployment in Slovakia (Slovakia.Org, â€Å"Slovak Economy†). This took place because the economy that rose out of the communist era in Slovakia was based on industrial production, particularly on weapons and military equipment (Slovakia.Org, â€Å"Slovak Economy†). There was a great difference of opinions between the Slovaks and Czechs about the nature and pace of economic reform in Czechoslovakia (Slovakia.Org, â€Å"20th Century†). The disagreements delayed the reform process and also the acceptance of a new constitution (Slovakia.Org, â€Å"20th Century†). It became obvious that the current form of government could meet the demands of both republics. As a result, Slovakia declared its sovereignty in July 1992, in other words, its laws took higher priority than those of the federal government (Slovakia.

Cover Girl Advertisement

When thinking of advertisements, for some odd reason, I immediately will think of Cover Girl makeup ads that are often found in almost every woman’s magazine. However, this particular advertisement features country music superstar Taylor Swift and very similar to all of their distinctive ads focuses mostly on her face. This ad is for their new â€Å"natureluxe silk foundation- luxury touched by nature. † From this relatively simple ad, as it only contains a close up of Taylor Swift as well as text, it allows for the discussion of it’s unique aesthetics. The first thing that I would like to discuss is the colors that are used within this advertisement. The advertisement finds balance by using a soft and light yet trendy green for their top lettering of Cover Girl, some pop out lettering under the image all to match the color of the actual foundation bottle. The advertisement becomes more appealing to the eye as Cover Girl is attempting to create an earthy yet â€Å"simple is beautiful† feel for their audience. Also, the actual colors of Taylor Swift herself are very fair and soft as it looks as if she is not wearing any foundations. In addition, she is wearing a pale pink ruffled dress adding to the light, fluffy and earthy feel of the advertisement as a whole. However, the majority of the wording is a dark black with some of the font in bold and different sizes. It is evident that the advertisers are attempting to bring their audience’s attention down from Taylor Swift to what they actually have to say about the product by using opposing colors and bold text. In addition to the colors that were used, the actual wording that was used is particularly interesting. The advertisement uses many different sizes and colors within the whole image. The top Cover Girl is in the light green color reflecting back to the idea of softness and it is the vantage point for a person’s eyes. It is very bold and automatically draws attention to the top half of the advertisement. Also, the different very black and dark bold text at the bottom of the page seems intriguing for a few reasons. First, the different font types and sizes attempt to make you really see the first three lines very clearly and get an understanding of what the product is. However, the work â€Å"new† happens to be in green followed by â€Å"natureluxe silk foundation† with â€Å"luxe† being bolded, suggesting that this product is truly â€Å"luxury touched by nature;† which is in very small print right below that as well. In addition, I find it interesting that the two black bolded lines both have the word â€Å"air† in them and also soft, air-like words, such as â€Å"fresh† and â€Å"breath. To me this is suggesting that even though the text may be dark and bold, this product is still going to make the user feel fresh and lightweight. Therefore, this brings me to the last topic of the lighting that is used within the image as well as the text. With the text having a dark and bold at the top, it slowly becomes lighter and smaller and even throws in come light green text in there as well, suggesting that it almost has a elegant, luxurious feel to the text just as much as the makeup is going to have on a person’s face. Also, the lighting within the image is very bright and the backdrop of a complete white again is keeping the theme of lightweight and airy flowing throughout the entire advertisement. In addition, the bright, artificial white lighting is also used on Taylor Swift’s face as well as arm to suggest that she is feeling fresh and clean when wearing this foundation.

Purchasing and supplies assignment Essay

ABC analysis In materials management, the ABC analysis (or Selective Inventory Control) is an inventory categorization technique. ABC analysis divides an inventory into three categories- â€Å"A items† with very tight control and accurate records, â€Å"B items† with less tightly controlled and good records, and â€Å"C items† with the simplest controls possible and minimal records. The ABC analysis provides a mechanism for identifying items that will have a significant impact on overall inventory cost, while also providing a mechanism for identifying different categories of stock that will require different management and controls. The ABC analysis suggests that inventories of an organization are not of equal value. Thus, the inventory is grouped into three categories (A, B, and C) in order of their estimated importance. ‘A’ items are very important for an organization. Because of the high value of these ‘A’ items, frequent value analysis is required. In addition to that, an organization needs to choose an appropriate order pattern (e.g. ‘Just- in- time’) to avoid excess capacity. ‘B’ items are  important, but of course less important than ‘A’ items and more important than ‘C’ items. Therefore ‘B’ items are intergroup items. ‘C’ items are marginally important. Advantages and Disadvantages of ABC Analysis Inventory Activity Based Costing, or ABC, is a method of allocating overhead and direct expenses related to the most important activities of the company first. This process allows business owners and managers an opportunity to better define the areas of manufacturing or sales that generate the most profit for the company. Inventory analyzed under the ABC method is classified in order of profitability to the company. Class A inventory accounts for 80 percent of revenue, class B inventory for 15 percent of revenue and class C inventory for 5 percent of revenue. Better Control of High-Priority Inventory ABC inventory analysis places tighter and more frequent controls on high-priority inventory. High-priority inventory, or class A inventory, is the class of inventory that customers request most often. In manufacturing, class A inventory also can include the items most often used in the production of goods. Because Class A inventory is directly linked to the success of the company, it is important to constantly monitor the demand for it and ensure stock levels match that demand. With ABC analysis, your company can use its resources to prioritize control of high-priority inventory over inventory that has a lower impact on your bottom line. More Efficient Cycle Counts Under the ABC inventory analysis method, you can allocate your resources more efficiently during cycle counts. A cycle count is the process of counting only certain items on scheduled dates. The frequency of your cycle counts and the items you choose to include depends on how often your inventory fluctuates. Once inventory is organized by class, you can focus regular cycle counts on class A inventory. Depending on your needs, it may be necessary to count class B inventory as infrequently as twice per year and class C inventory only once per year. The ABC analysis method saves time and  labor counting only the inventory required by the cycle for the class of inventory versus counting all inventory items each cycle Disadvantages Conflict with Other Cost Systems The ABC inventory analysis does not meet Generally Accepted Accounting Principles (GAAP) requirements and also conflicts with traditional costing systems. Companies that use ABC methods must operate two costing systems, one for internal use under the ABC method and another for compliance with GAAP. Traditional costing systems generate the figures required by GAAP. Traditional costing systems allocate cost drivers by the actual unit cost, rather than by the activity percentage of the cost driver. As a result, ABC cost assignments often differ from traditional cost system assignments. Requires Substantial Resources The ABC method requires more resources to maintain than traditional costing systems. When cycle counts are performed, class A inventory must be routinely analyzed to determine if the inventory still consists of high-priority items. If an inventory piece is no longer used or demanded as frequently, it is moved to another inventory classification. This constant process requires much more data measurement and collection Just in time A strategy for inventory management in which raw materials and components are delivered from the vendor or supplier immediately before they are needed in the manufacturing process Advantages & Disadvantages of Just-in-Time Inventory Companies turnover significant inventory control to suppliers with just-in-time inventory. Just-in-time (JIT) inventory refers to an inventory management system with objectives of having inventory readily available to meet demand, but not to a point of excess where you must stockpile extra products. Maintaining inventory takes time and has costs, which is what motivates companies to implement JIT programs. Customer Needs Balancing the goals of avoiding stock outs while minimizing inventory costs is at the heart of just-in-time inventory. One of the main benefits of automated and efficient inventory replenishment systems is that you can quickly respond to reduced inventory levels. Companies are now equipped to pull back on stock in a given product category and ramp up inventory in another as customer needs and interests change. Inventory Costs Minimization of inventory management costs is a primary driver and benefit of just-in-time practices. Inventory management has costs, and when you reduce the amount of holding space and staff required with JIT, the company can invest the savings in business growth and other opportunities, points out the Accounting for Management website. You also have less likelihood of throwing out product that gets old or expires, meaning reduced waste. Coordination A disadvantage of managing a just-in-time inventory system is that it requires significant coordination between retailers and suppliers in the distribution channel. Retailers often put major trust in suppliers by syncing their computer systems with suppliers so they can more directly monitor inventory levels at stores or in distribution centers to initiate rapid response to low stock levels. This usually means build up of technology infrastructure, which is costly. This coordinated effort is more involving on the whole than less time intensive inventory management systems. Risks Just-in-time inventory is not without risks. By nature of what it is, companies using JIT intend to walk a fine line between having too much and too little inventory. If company buyers fail to adjust quickly to increased demand or if suppliers have distribution problems, the business risks upsetting customers with stock outs. If buyers over compensate and buy extra inventory to avoid stock outs, the company could experience higher inventory costs and the potential for waste. Vendor managed inventory Top of Form Bottom of Form Vendor Managed Inventory (VMI) . Bottom of Form Vendor Managed Inventory or VMI is a process where the vendor creates orders for their customers based on demand information that they receive from the customer. The vendor and customer are bound by an agreement which determines inventory levels, fill rates and costs. This arrangement can improve supply chain performance but reducing inventories and eliminating stock-out situations. VMI, the vendor specifies delivery quantities sent to customers through the distribution channel using data obtained from Electronic Data Interchange (EDI). There are a number of EDI transactions that can form the basis of the VMI process, 852,855 and the 856. The first is the Product Activity Record, which is known as 852. This EDI transaction contains the sales and inventory information such as key product activity and forecast measures, such as Quantity sold ($) Quantity sold (units) Quantity on hand ($) Quantity on hand (units) Quantity on order ($) Quantity on order (units) Quantity received ($) Quantity received (units) The EDI 852 information can be sent from the customer to the vendor on a weekly basis or more frequently in high-volume industries. The vendor makes the order decision based on this data in the 852 transmission. The vendor reviews the information that has been received from the vendor and an order determination is made based on existing agreement between the vendor and customer. Many vendors use a VMI software package to assist them in determining order requirements. VMI software can be part of an ERP suite  such as SAP or be a standalone option such as products from Blue Habanero, LevelMonitor, NetVMI or others. The software will verify if the data as accurate and meaningful. It will calculate a reorder point for each item based on the data and any customer information such as promotions, seasonality or new items. The quantity of each item available at the customer is compared with the reorder point for each item at each location. This will determine if an order is needed and the quantities required. The second EDI transaction that is used in VMI is the purchase order acknowledgment, which is known as the 855. This EDI document sent to the customer contains a number of fields including; Purchase Order Number Purchase Order Date Purchase Order Line item Quantity Price Item Number Description of Item Freight Charge Ship Date Some vendors supply an advance ship notice (ASN) to their customers to inform them of an incoming order, which is know as EDI 856. The ASN differs from the purchase order acknowledgement in both timing and content. The 856 is sent to the customer after the shipment has been made instead of at the time of the purchase order. Advantages of vendor managed inventory One of the benefits of VMI is that the vendor is responsible for supplying the customer when the items are needed. This removes the need for the customer to have significant safety stock. Lower inventories for the customer can lead to significant cost savings. The customer also can benefit from reduced purchasing costs. Because the vendor receives data and not purchase orders, the purchasing department has to spend less time on calculating and producing purchase orders. In addition, the need for purchase order corrections and reconciliation is removed which further reduces purchasing costs. Cost saving can also be found in reduced warehouse costs. Lower inventories can reduce the need for warehouse space and  warehouse resources. When a business relies on vendor-managed inventory, it’s placing a big bet on that company’s ability to deliver. The vendor has to be able to determine when to send new stock, what specific products to send and in what quantities. This can be beyond the means of a supplier that doesn’t have the software, infrastructure or expertise in place to make that work. If just-in-time inventory turns into way-too-late shipments thanks to poor demand forecasts or a supply-chain breakdown, VMI isn’t going to work. Disadvantages of vendor managed inventory Unscrupulous Partners Even with return policies in effect, a business risks being taken advantage of by a supplier looking to make its numbers. For example, a vendor might ship an excessive amount of product at the end of the quarter and book it as revenue to boost its sales figures regardless of the customer’s needs. The customer may return the unneeded merchandise, but the vendor already has gotten what it wants out of the transaction. In addition, VMI may require a company to share sensitive information with the supplier, which can leave it in a delicate position should the relationship between the parties ever falter. Limited Options A vendor-managed inventory system can be bad for a business when it keeps the business from seeking better-suited or lower-cost options. Because VMI links the supply chain together so closely, it serves as a disincentive to make a change that necessitates changing the company’s inventory management system. As a result, a business may find its inventory savings negated by settling for higher-priced or inferior goods. Market Responsiveness Customer preferences can change in a heartbeat, with favorites falling out of style and new items becoming more in demand. If your vendor doesn’t supply a wide enough range of products and your contract prevents you from going to the competition, you may be stuck with items your customers don’t want and no way to fix the problem. Make sure your contract doesn’t bind you so tightly to your vendor that you both sink together when the market changes. The manufacturer can gain some benefits from vendor managed inventory as they can gain access to a customers point of sale (POS) data makes their forecasting somewhat easier. Manufacturers can also work their customers promotional plans into forecasting models, which means enough stock will be available when their promotions are running. As a manufacturer has more visibility to their customers inventory levels, it is easier to ensure that stock-outs will not occur as they can see when items need to be produced. INTRODUCTION TO MRP manufacturing resource planning (MRP II) is defined as a method for the effective planning of all resources of a manufacturing company. Ideally, it addresses operational planning in units, financial planning, and has a simulation capability to answer â€Å"what-if† questions and extension of closed-loop MRP. This is not exclusively a software function, but the management of people skills, requiring a dedication to database accuracy, and sufficient computer resources. It is a total company management concept for using human and company resources more productively. MRP is a comprehensive system used for planning and scheduling materials requirement. It assists in improving the materials handling capability of an organization. But it has certain disadvantages. Some of the advantages and disadvantages of MRP have been discussed below Advantages Some of the key benefits that can be derived from using an MRP system are: Reduced per unit cost of production thus enabling an organization to price its products competitively Low inventory levels, especially for in-process materials Better response to market demand Better customer service Reduced set-up and tear-down costs Comprehensive material tracking and optimized production scheduling Improvement in capacity allocation and planning Disadvantages Following are the disadvantages of an MRP system: High costs and technical complexities in implementation. In addition, organizations, which use an MRP system need to spend considerable effort on installing necessary equipment (computers), training personnel, modifying the software to serve their specific needs, validating, testing, and eliminating possible errors, and maintaining the software. The time required for planning and implementing an MRP system is generally very long. Data entry and file maintenance requires considerable inputs in the form of training and education of the personnel. Dependence on forecast values and estimated lead-time can sometimes be misleading. The implementation of an MRP system can be effective only when there is a high degree of accuracy in the organization’s operations. It requires high commitment from the top management of an organization. The management should educate its executives on the importance of MRP as a strategic planning tool. The success of an MRP system, like that of any other system depends on proper implementation and right application. Managers can derive more benefits if they use the MRP system as a management-planning tool. MRP needs enormous human efforts and care in continuously collecting the required information for the system. However, many organizations prefer to adopt MRP systems, as the advantages of the system outweigh its disadvantages. Are you searching Operations Management expert for help with Advantages and Disadvantages of an MRP system questions? Advantages and Disadvantages of an MRP system topic is not easier to learn without external help? We at www.expertsmind.com offer finest service of Operations Management assignment help and Operations Management homework help. Live tutors are available for 24Ãâ€"7 hours helping students in their Advantages and Disadvantages of an MRP system related problems. We provide step by step Advantages and Disadvantages of an MRP system question’s answers with 100% plagiarism free content. We prepare quality content and notes for Advantages and Disadvantages of an MRP system topic under Operations Management theory and study material. These are avail for subscribed users and they can get advantages anytime. Economic Order Quantity (EOQ) Economic order quantity (EOQ) is the order quantity of inventory that minimizes the total cost of inventory management. Two most important categories of inventory costs are ordering costs and carrying costs. Ordering costs are costs that are incurred on obtaining additional inventories. They include costs incurred on communicating the order, transportation cost, etc. Carrying costs represent the costs incurred on holding inventory in hand. They include the opportunity cost of money held up in inventories, storage costs, spoilage costs, etc. Ordering costs and carrying costs are quite opposite to each other. If we need to minimize carrying costs we have to place small order which increases the ordering costs. If we want minimize our ordering costs we have to place few orders in a year and this requires placing large orders which in turn increases the total carrying costs for the period. We need to minimize the total inventory costs and EOQ model helps us just do that. Total inventory costs = Ordering costs + Holding costs By taking the first derivative of the function we find the following equation for minimum cost EOQ = SQRT(2 Ãâ€" Quantity Ãâ€" Cost Per Order / Carrying Cost Per Order) Example ABC Ltd. is engaged in sale of footballs. Its cost per order is $400 and its carrying cost unit is $10 per unit per annum. The company has a demand for 20,000 units per year. Calculate the order size, total orders required during a year, total carrying cost and total ordering cost for the year. Solution EOQ = SQRT(2 Ãâ€" 20,000 Ãâ€" 400/10) = 1,265 units Annual demand is 20,000 units so the company will have to place 16 orders (= annual demand of 20,000 divided by order size of 1,265). Total ordering cost is hence $64,000 ($400 multiplied by 16). Average inventory held is 632.5 ((0+1,265)/2) which means total carrying costs of $6,325 (i.e. 632.5 Ãâ€" $10). businesses require an efficient inventory system to maximize profit. The Economic Order Quantity model is a commonly used element of a continuous review inventory system. It is based on a formula that calculates the most economical number of items a business should order to minimize costs and maximize value when re-stocking inventory. Small business owners should evaluate the advantages and disadvantages of this inventory model before implementing it. DISADVANTAGES Minimizes Storage and Holding Costs Storing inventory may be expensive for small business owners. The main advantage of the EOQ model is the customized recommendations provided regarding the most economical number of units per order. The model may suggest buying a larger quantity in fewer orders to take advantage of discount bulk buying and minimizing order costs. Alternatively, it may point to more orders of fewer items to minimize holding costs if they are high and ordering costs are relatively low. Specific to the Business Maintaining sufficient inventory levels to match customer demand is a balancing act for many small businesses. Another advantage of the EOQ model is that it provides specific numbers particular to the business regarding how much inventory to hold, when to re-order it and how many items to order. This smooths out the re-stocking process and results in better customer service as inventory is available when needed. Complicated Math Calculations The EOQ model requires a good understanding of algebra, a disadvantage for small business owners lacking math skills. Additionally, effective EOQ models require detailed data to calculate several figures. For example, the key formula of the model calculates the square root of 2DS/H, where D is the number of units purchased annually, S is the fixed ordering charge, and H is the holding cost per unit. Rent or mortgage payments, utility costs and property taxes are required just to calculate H. Based on Assumptions The EOQ model assumes steady demand of a business product and immediate  availability of items to be re-stocked. It does not account for seasonal or economic fluctuations. It assumes fixed costs of inventory units, ordering charges and holding charges. This inventory model requires continuous monitoring of inventory levels. The effectiveness of the basic EOQ model is most limited by the assumption of a one-product business, and the formula does not allow for combining several different products in the same . INTRODUCTION TO ERP What is ERP? It means enterprise resource planning, which itself means planning the resources in an enterprise (business). So, this abbreviation simply means, that this is a way of using the resources in a company more effectively. Notice, that this is not some kind of software, this is an ideology. Some companies build applications, that work according to this ideology, called ERP solutions. But there is something more there†¦ the developers of such solutions build their application implementing some best business practices in it, and this is one of the most valuable features of ERP systems. The so called know-how is the most common thing that many of the small businesses out there lack. And this could be the difference between the successful, fast flowing company and the average company. At some point of the life cycle of an enterprise, the need of such a system becomes inevitable. The earlier managers understand this, the better. As the company grows, its control becomes more and more difficult task. An integrated solution, like ERP software, could be really helpful in this situation. Every small company, that wants to grow big just needs to use an ERP system. Some big corporations even would not do business with you, if you hadn’t such a software implemented and working in your business. Such a solution is a proof for higher quality and that you are running your enterprise well and effectively. There are many many benefits coming from these systems, later we’ll talk about them more. ERP solutions are from the group of integrated systems, which means that they are built to integrate any part of your business. Initially the manager in a small company can coordinate the different departments relatively easy, but when the company starts to grow, the same happens with the size and number of departments. The coordination between them becomes really hard and expensive. At some point of time a crisis of control is inevitable. ERP systems can be  managers’ best friend then, because this is one of their main purpose – to integrate your business. Advantages & Disadvantages of ERP (Enterprise Resource Planning) Systems In order to understand computer networks better, it would be helpful to have an overview of the applications running on the network. ERP or Enterprise Resource Planning is an important enterprise application that integrates all the individual department functions into a single software application. ERP Systems make it easier to track the workflow across various departments. They reduce the operational costs involved in manually tracking and (perhaps) duplicating data using individual & disparate systems. In this article, let us have a look at the advantages and dis-advantages of implementing ERP (Enterprise Resource Management) Software Systems. Advantages of ERP (Enterprise Resource Planning) 1. Complete visibility into all the important processes, across various departments of an organization (especially for senior management personnel). 2. Automatic and coherent workflow from one department/function to another, to ensure a smooth transition and quicker completion of processes. This also ensures that all the inter-departmental activities are properly tracked and none of them is ‘missed out’. 3. A unified and single reporting system to analyze the statistics/status etc. in real-time, across all functions/departments. 4. Since same (ERP) software is now used across all departments, individual departments having to buy and maintain their own software systems is no longer necessary. 5. Certain ERP vendors can extend their ERP systems to provide Business Intelligence functionalities, that can give overall insights on business processes and identify potential areas of problems/improvements. 6. Advanced e-commerce integration is possible with ERP systems – m ost of them can handle web-based order tracking/ processing. 7. There are various modules in an ERP system like Finance/Accounts, Human Resource Management, Manufacturing, Marketing/Sales, Supply Chain/Warehouse Management, CRM, Project Management, etc. 8. Since ERP is a modular software system, its possible to implement either a few modules (or) many modules based on the requirements of an organization. If  more modules implemented, the integration between various departments may be better. 9. Since a Database system is implemented on the backend to store all the information required by the ERP system, it enables centralized storage/back-up of all enterprise data. 10. ERP systems are more secure as centralized security policies can be applied to them. All the transactions happening via the ERP systems can be tracked. 11. ERP systems provide better company-wide visibility and hence enable better/faster collaboration across all the departments. 12. It is possible to integrate other systems (like bar-code reader, for example) to the ERP system through an API (Application Programing Interface). 13. ERP systems make it easier for order tracking, inventory tracking, revenue tracking, sales forecasting and related activities. Disadvantages of ERP (Enterprise Resource Planning) 1. The cost of ERP Software, planning, customization, configuration, testing, implementation, etc. is too high. 2. ERP deployments are highly time-consuming – projects may take 1-3 years (or more) to get completed and fully functional. 3. Too little customization may not integrate the ERP system with the business process & too much customization may slow down the project and make it difficult to upgrade. 4. The cost savings/payback may not be realized immediately after the ERP implementation & it is quite difficult to measure the same. 5. The participation of users is very important for successful implementation of ERP projects – hence, exhaustive user training and simple user interface might be critical. But ERP systems are generally difficult to learn (and use). 6. There maybe additional indirect costs due to ERP implementation – like new IT infrastructure, upgrading the WAN links, etc. 7. Migration of existing data to the new ERP systems is difficult (or impossible) to achieve. Integrating ERP systems with other stand alone software systems is equally difficult (if possible). These activities may consume a lot of time, money & resources, if attempted. 8. ERP implementations are difficult to achieve in decentralized organizations with disparate business processes and systems. 9. Once an ERP systems is implemented it becomes a single vendor lock-in for further upgrades, customizations etc. Companies are at the discretion of a single vendor and may not be able to negotiate effectively for their services. 10. Evaluation prior to implementation of ERP system is critical. If this step  is not done properly and experienced technical/business resources are not available while evaluating, ERP implementations can (and have) become a failure ADVANTAGES AND DISADVANTAGES OF BARCODING Bar codes consist of bars and spaces that vary in width. The bars and spaces on a bar code correspond to numbers and letters that represent descriptive data. Scanners scan the bar code to find the corresponding description of the item, including the make and model of an item and its price. Many stores and shops commonly use bar code technology for stock inventory. It’s also used to scan when a customer wants to purchase it. There are advantages and disadvantages regarding the use of bar code technology. the Disadvantages of Barcodes disadvantages of Bar Codes Time In the blink of an eye, scanning a bar code instantly displays the product name, type of product and price. Bar codes also have a 12-digit product number that when entered also produces the same information. However, if a cashier has a long line of impatient customers, entering the product details of each item is time-consuming, especially in grocery stores where each customer usually purchases multiple items. Although bar codes are a huge advantage when it comes to time, it can also be a disadvantage if the bar code on the product doesn’t correspond to the right product, or the bar code scanner isn’t working Inventory Inventory is a huge component of any goods and services business. Keeping track of inventory can be a tedious, time-consuming and difficult task to do without a bar code scanner. With a bar code scanner, shop owners simply scan the bar code on the items and keep track of the store’s inventory that way. When an individual purchases an item, the scanner transmits this information to the computer and it’s calculated on the stock inventory via computer technology. The major disadvantage here is if the cashier sees a number of items that look or seem the same and scans one item multiple times to save  time. Each item and type of item has a unique bar code and must be scanned separately. As a result, this could affect inventory. Labels Labels make it easy for bar code scanners and computers to recognize the product item and vendor name. But when a label is damaged or non-existent, it poses problems. Damaged labels make it difficult for the cashier to scan. Even the 12-digit number on the label may be damaged to the point where it is not legible. When this occurs, the checkout process is significantly delayed while the same product is sought out and brought to the cashier for scanning. In addition, some products, such as fruits and vegetables at grocery stores, don’t have labels, which potentially cause delay. However, cashiers are usually trained to remember the 12-digit number corresponding to items without labels. Costs While bar code technology drastically reduces the time and energy spent on inventory and checkout procedures, it is costly. Businesses that want to implement bar code equipment and technology have to withstand the growing pains of doing so. This includes training employees, installing the equipment, expensive printers and the time spent entering codes for labels. However, despite the disadvantages with start-up, the bar code technology benefits businesses in the long run. CONCLUSION ON THE ABOVE INVENTORY MANAGEMENT TOOLS One should start by saying that inventory management is the active control program that facilitates the management of sales, purchases and disbursements. The inventory management is all about special software that would reduce the costs and human efforts required to create invoices, purchase orders, various receiving lists, or payment receipts. The inventory management attempts to coordinate all the efforts in the warehouse, retail and other product lines in order to develop better controls of the processes that go inside the organization. Speaking about a particular software, I would like to note that one of the many is available at http://www.advanceware.net/modules.asp. The software is said to provide all  the needed inventory management tools in just one package. The website provides a demo version of the software where one is able to explore the shipping module. The software allows the company to print serial numbers on an invoice, set a default tax rate, generate several types of reports, receive and process various customer/vendor returns, and place/process customer orders in various currencies. As for the inventory management in the workplace I would like to note that because I work in the hotel industry, the inventory management is different here than in other industries. The inventory that hotel manages is the room space available for rental. One should understand that because hotel industry sells services the improper inventory management might mean that the hotel will not fill up all the rooms. Thus, the inventory management for the hotel industry should focus on the timeliness with respect to room occupation and marketing. The inventory management should also account for the food, towels, bed sheets, and other items required for the daily hotel operations. The inventory management should assure that the hotel rooms are filled right after they are freed, otherwise, the hotel would lose out since unlike tangible inventory, the service hotel industry offers cannot be s References Harris, Ford W. (1990) [Reprint from 1913]. â€Å"How Many Parts to Make at Once†. Operations Research (INFORMS) 38 (6): 947–950. doi:10.1287/opre.38.6.947. JSTOR 170962. Retrieved Nov 21, 2012. edit Hax, AC and Candea, D. (1984), Production and Operations Management, Prentice-Hall, Englewood Cliffs, NJ, p. 135 Grubbstrà ¶m, Robert W. (1995). â€Å"Modelling production opportunities — an historical overview†. International Journal of Production Economics 41: 1–14. doi:10.1016/0925-5273(95)00109-3. Nahmias, Steven (2005). Production and operations analysis. McGraw Hill Higher Education. edit Altintas, N.; Erhun, F.; Tayur, S. (2008). â€Å"Quantity Discounts Under Demand Uncertainty†. Management Science 54 (4): 777–792. doi:10.1287/mnsc.1070.0829. edit Andrew Caplin and John Leahy, â€Å"Economic